Start your project with reliable, scan-accurate documentation you can trust.
STATS
Years in Commercial Architecture
U.S. Markets Served
±1/2"
Verified Dimensional Accuracy
Buildings Documented
Expert 3D Laser Scanning for Manufacturing Facilities & Production Environments
Industrial as-built documentation differs from commercial office scanning by focusing on heavy equipment clearances, process systems, utility distribution networks, and OSHA compliance requirements specific to production environments.
What Are Industrial As-Built Drawings?
Industrial as-built drawings are detailed, dimensionally accurate representations of existing manufacturing facilities, production floors, utility systems, and industrial infrastructure. Unlike standard commercial as-builts, industrial documentation requires:
- Precision to 1-3mm accuracy for equipment alignment and installation
- Complete utility mapping (electrical, HVAC, plumbing, compressed air, process piping, steam)
- Structural load analysis support for heavy equipment installation
- Clearance verification for material handling, worker safety, and equipment access
- Compliance documentation for OSHA, EPA, and building codes
Industries We Serve
Manufacturing Facilities
- Automotive assembly plants
- Electronics manufacturing
- Food & beverage production
- Pharmaceutical manufacturing
- Aerospace component fabrication
- Plastics and injection molding
- Medical device manufacturing
Industrial Operations
- Chemical processing plants
- Oil & gas facilities
- Mining operations
- Power generation facilities
- Water treatment plants
- Refineries and petrochemical
Industrial Warehousing & Material Handling
(For retail fulfillment centers, see our Retail As-Built page)
- Industrial distribution centers
- Heavy equipment storage
- Cold storage facilities (industrial-scale)
- Automated material handling systems
- Bulk storage operations
- Cross-dock industrial facilities
Heavy Industrial
- Steel mills
- Foundries
- Paper mills
- Cement plants
- Recycling facilities
- Fabrication shops
Why Laser Scanning Over Traditional Surveying?
We provide scanning and documentation services to a wide range of hospitality properties:
- Speed: Capture entire manufacturing floor in hours vs. weeks
- Accuracy: 1-3mm precision vs. 10-25mm with tape measures
- Safety: No production shutdown or hot work permits required
- Completeness: Capture overhead utilities, pipe runs, and equipment simultaneously
- Cost: 40-60% less expensive than traditional methods for complex facilities
- Direct Answer: 3D laser scanning is faster, more accurate, and safer than traditional measuring methods for industrial facilities because it captures millions of data points per second without requiring production shutdowns or worker access to dangerous areas.
Common Industrial As-Built Applications
Plant Expansions & Retrofits
When adding new production lines or equipment, precise as-builts prevent costly interferences with existing utilities, structural elements, and clearance issues.
Real Cost Savings: A typical equipment interference discovered during installation costs $45,000-$125,000 in delays, rework, and equipment rental. Our scanning prevents this.
Heavy Equipment Installation Planning
New CNC machines, robotics, stamping presses, conveyor systems, and production equipment require exact floor elevations, utility locations, and clearance verification.
Compliance & Safety Documentation
OSHA, EPA, and insurance companies require accurate facility documentation for:
- Emergency egress planning
- Hazmat storage compliance
- Fire suppression system verification
- Structural load analysis
- Worker safety clearances
- Lockout/tagout documentation
Building Information Modeling (BIM)
Convert point cloud data to Revit, AutoCAD, or other BIM formats for:
- Facilities management
- Maintenance planning
- Energy modeling
- Space optimization
- Future expansion design
Process Piping & Utility Mapping
Document complex networks of:
- Process piping systems
- HVAC ductwork
- Electrical conduit & cable trays
- Compressed air distribution
- Chemical feed lines
- Steam distribution
- Chilled water systems
- Natural gas lines
Our scanning work has been trusted by some of the most iconic properties in hospitality — including the MGM Grand, Bellagio, and Fontainebleau Las Vegas. Explore our case studies
Our Industrial Scanning Process
1. Pre-Scan Planning (24-48 hours)
● Production schedule coordination
● Access requirements and permits
● Hazardous area protocols (Class 1 Div 1/2 considerations)
2. 3D Laser Scanning (1-3 days typical)
● Faro Focus or Leica RTC360 scanners
● 1-3mm accuracy throughout
● Full color documentation
● Overhead and difficult-to-access areas
● Non-sparking equipment for hazardous locations
3. Point Cloud Processing (3-5 days)
● Registration and quality control
● Noise filtering
● Coordinate system alignment
● Clash detection analysis
4. CAD/BIM Deliverables (5-10 days)
● AutoCAD 2D drawings
● Revit 3D models
● Navisworks coordination models
● PDF plans for contractors
Deliverable Options
Standard Package
- Registered point cloud (.rcs, .e57)
- 2D AutoCAD floor plans
- Reflected ceiling plans
- Exterior elevations
- PDF construction documents </ul
BIM Package
- Everything in Standard
- Revit 3D model (LOD 200-300)
- Navisworks coordination file
- Equipment families
- Utility system modeling
Advanced Package
- Everything in BIM
- Piping isometric drawings
- Equipment anchor bolt plans
- Structural framing verification
- Clearance analysis reports
- Utility tie-in drawings
Looking for As-Built Drawings That Your Whole Team Can Build From?
Industrial scanning only pays off when it turns into usable drawings/models that prevent clashes, downtime, and rework. Our main As-Built Drawings page explains how we scope deliverables (2D, BIM, point cloud), run QA/QC, and deliver files your engineers/contractors can use immediately.
Typical industrial-ready deliverables include:
- 2D CAD plans + elevations/sections + RCPs (as scoped)
- Revit models / coordination-ready outputs when needed
- Registered point clouds for in-house engineering teams
- Hybrid packages tailored to equipment + utility constraints
Cost Factors for Industrial Scanning
Typical investment: $8,500 – $45,000+ depending on:
- Facility Size: $0.15-$0.35 per square foot for basic scanning
- Complexity: Multi-level facilities, mezzanines, complex piping
- Access Requirements: Hot work permits, confined space, hazardous areas
- Deliverable Level: Point cloud only vs. full Revit BIM model
- Timeline: Rush projects (1-week delivery) cost 30-50% premium
ROI Answer: Industrial as-built scanning typically costs $8,500-$45,000 but prevents $50,000-$250,000+ in construction delays, equipment interferences, and rework, providing 3-8x return on investment.
Markets We Serve
We provide industrial as-built scanning services in:
- Las Vegas, Nevada
- Phoenix, Scottsdale, Tucson,Arizona
- Los Angeles, California
- San Francisco, California
- Denver, Colorado
- Salt Lake City, Utah
- Austin, San Antonio, Houston, Dallas ,Texas
Nationwide for larger projects
Why Choose LiDAR Precise Plans?
27 Years Commercial Experience
Our principal has nearly three decades in commercial architecture and understands industrial facility requirements, code compliance, and construction coordination.
Major Brand Experience
We've worked with Fortune 500 companies including Nike, Apple, Coca-Cola, and REI on complex commercial projects requiring the same precision your industrial facility demands.
Multi-Market Presence
Physical offices in seven major Southwest markets means local service with national capabilities.
Technology Leadership
Faro Focus and Leica BLK360 scanners with Autodesk ReCap, Revit, and advanced processing capabilities.
Related Services for Other Building Types
Looking for as-built documentation for different property types?
- Corporate offices and tenant improvements → Commercial As-Built Services
- Retail stores and shopping centers → Retail As-Built Documentation
- Hotel and restaurant properties → Hospitality As-Built Services
- Single-family homes and estates → Residential As-Built Services
- Historic buildings and landmarks → Historic Preservation Services
Frequently Asked Questions
A: Our scanners provide 1-3mm accuracy, which exceeds the requirements for most industrial equipment installations that typically require ±6mm tolerance.
A: No. Scanning is non-contact and non-disruptive. We work around production schedules and can scan during off-shifts if needed.
A: Yes. Our scanning equipment is non-sparking and approved for many hazardous environments. We follow all facility safety protocols and can work with safety personnel.
A: Typically 2-3 days for data collection, 10-14 days for complete AutoCAD deliverables, depending on complexity.
A: Point clouds (.rcs, .rcp, .e57, .las), AutoCAD (.dwg), Revit (.rvt), Navisworks (.nwc/.nwd), PDFs, and others as requested.
A: Yes. We coordinate with production schedules and work during shift changes, weekends, or shutdowns as needed.
A: We provide accurate floor elevations and structural documentation. You'll need a structural engineer for load calculations, but our data gives them exact conditions.
A: As-built drawings show actual installed conditions measured with laser scanning. Record drawings are contractor-marked prints that may have inaccuracies. As-builts are far more reliable.
Get Started
Request Your Free Quote
Industrial facility scanning requires careful planning. Contact us for:
Facility-specific scope discussion
Accurate pricing based on your needs
Timeline planning around production schedules
Safety protocol coordination
Sample deliverables review
